No products in the cart.
$7,999.00
18 in. BlueBird Sod Cutter Honda Engine 5.5 hp SC550
SKU: N/AThe SC550 model is designed for contractor’s rental shops, golf courses, country clubs and homeowners that have a need to remove and replace sod in small targeted areas. It can also be used for preparing for a new landscaped bed, clearing for a new sidewalk or driveway, or tackling other home improvement projects. With 0.25” cutting depth increments up to 2.5”, this unit can tackle all of your needs and grass types. The knifed outside blade edges allow the machine to easily cut through running stem grasses.
$2,899.00
Scag 7B03
SKU: N/AGeneral Information
ManufacturerSCAG Power EquipmentModelSFC-21 21 in. Kohler Command PRO CV224
Model CodeSFC-21-7CVColorOrange
Body
Safety FeaturesHandle actuated operator presence system
Drivetrain
Transmission/Drive
GT MG 512 transmission, 3-speed
Transmission output shaft – 0.50 in. diameter
Transmission SpeedGovernor – Mechanical governor with variable control set at 3,300 rpm, idle set at 1,500 rpm
Travel SpeedForward – Up to 4.25 mphWheels/Tires
Front – 9 x 2.25
Drive – 10.5 x 3
Engine
Engine MakeKohler®Engine ModelCommand PRO® CV224
Engine Type4 cycle gas, OHV, vertical shaftCoolingAir
CylindersSingle, One with cast-iron cylinder boreHorsepower7 hp @ 3,300 rpm
Displacement224 ccAir CleanerQuad-Clean™ four-stage, cyclonic air filter
StarterEasy-Pull™ recoil startLubricationOil pump group – Steel oil pump, full pressure with spin-on oil filter
Fuel Capacity1 gal. (3.785 l) plastic tank
Measurements
Length
In operating position – 63 – 68.5 in.
In storage position – 41 in.
Width23.25 in.
Height
Low in operating position – 32.75 in.
High in operating position – 43.5 in.
In storage position – 22 in.
Weight
With bagger – 143 lb.
Without bagger – 138 lb.
Track Width21.2 in.Mowing Height Adjustments1.5 to 4.5 in. in 0.5 in. increments
Mowing WidthTrue – 21 in. (53.34 cm)
Operational
SteeringVariable drive control bar and 3-speed selector lever on handlebarDeck Construction
14 ga. deck with 14 ga. replaceable guards for strength and longevity. Deep draw stamped
Deck type – High-vacuum, high-capacity design
Thickness – 14 ga.
Blades
Cutter – 0.1345 in. thick, milled edge, wear resistant
Engagement – Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade
Blade Brake ClutchHeavy-duty
DischargeRear, extra wide discharge openingMulchingPlug
Other
Includes
Exhaust – Front discharge muffler with guard
Handle bars – 1 in. diameter, thick wall tubing, 3-position adjustable
Fabric grass catcher – 2.74 cu. ft. (2.2 bu.)
Warranty
1-year commercial machine
3-year or 500-hr. non-commercial machine
SR engine
90-day wear item and rental use
Engine
$14,499.00
Scag 8b26
SKU: N/ABrand: SCAG
Supplier Part #:8B26
V-RIDE-II – 32″ – 16FX Kawasaki
$8,119.00
Scag 8C23
SKU: N/AGeneral
Total Fuel Capacity 3.5 gallons (36″ and 42″)
5.5 gallons (48″, 52″ and 61″)
Drive Tires 20″ x 8″-10″ (36″)
20″ x 10″-8″ (42″, 48″ and 52″)
20″ x 10″-10″ (61″)
Caster Tires 11″ x 4″-5″ (36″ and 42″)
11″ x 6″-5″ (48″, 52″ and 61″)
Seat Padded with arm rests, adjustment forward and back (tools required)
(no armrests on 36″ and 42″ models)
Drive System
Drive System Type 36″ and 42″ models: Hydro-Gear ZT-2800 Transaxle
48″, 52″ and 61″ models: Tuff Torq TZ450 Transaxle
Pumps Internal Pump: 10 cc
Motors Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
Forward Ground Speed 7 mph
Reverse Ground Speed 5 mph
Parking Brake Hand lever
Deck
Cutting Widths 36″, 42″, 48″, 52″ and 61″
Cutting Height 1.5″ to 4.5″ in .25″ increments
Spindles Aluminum housing with sealed ball bearings.
Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Deck Lift Foot-operated pedal
Type Heavy-Duty Hero Cutter Deck
Blade Engagement Ogura GT1 (74 ft lb) – (36″, 42″, 48″ and 52″)
Ogura GT2 (108 ft lb) – (61″)
Adjustable air-gap for extended life.
$14,499.00
Scag V-Ride II (32″)
SKU: N/A16HP Kawasaki® FX600 Series Engine
32-inch, 2-blade Advantage fabricated deck
Hydro-Gear®10cc pump and Parker 12ci motor
5 gallon fuel capacity
Ground speed: 8.5 mph forward/5 mph reverse
Front wheels: 11 x 4 in x 5 in
Rear wheels: 20 x 6.5 in x 10 in
3-Year or 500 Hours (Whichever Comes First) Residential Warranty, 2-Year Commercial Warranty
Model: SVRII-32A-16FX
18 in. BlueBird Sod Cutter Honda Engine 5.5 hp SC550
The SC550 model is designed for contractor’s rental shops, golf courses, country clubs and homeowners that have a need to remove and replace sod in small targeted areas. It can also be used for preparing for a new landscaped bed, clearing for a new sidewalk or driveway, or tackling other home improvement projects. With 0.25” cutting depth increments up to 2.5”, this unit can tackle all of your needs and grass types. The knifed outside blade edges allow the machine to easily cut through running stem grasses.
Scag 7B03
General Information
ManufacturerSCAG Power EquipmentModelSFC-21 21 in. Kohler Command PRO CV224
Model CodeSFC-21-7CVColorOrange
Body
Safety FeaturesHandle actuated operator presence system
Drivetrain
Transmission/Drive
GT MG 512 transmission, 3-speed
Transmission output shaft – 0.50 in. diameter
Transmission SpeedGovernor – Mechanical governor with variable control set at 3,300 rpm, idle set at 1,500 rpm
Travel SpeedForward – Up to 4.25 mphWheels/Tires
Front – 9 x 2.25
Drive – 10.5 x 3
Engine
Engine MakeKohler®Engine ModelCommand PRO® CV224
Engine Type4 cycle gas, OHV, vertical shaftCoolingAir
CylindersSingle, One with cast-iron cylinder boreHorsepower7 hp @ 3,300 rpm
Displacement224 ccAir CleanerQuad-Clean™ four-stage, cyclonic air filter
StarterEasy-Pull™ recoil startLubricationOil pump group – Steel oil pump, full pressure with spin-on oil filter
Fuel Capacity1 gal. (3.785 l) plastic tank
Measurements
Length
In operating position – 63 – 68.5 in.
In storage position – 41 in.
Width23.25 in.
Height
Low in operating position – 32.75 in.
High in operating position – 43.5 in.
In storage position – 22 in.
Weight
With bagger – 143 lb.
Without bagger – 138 lb.
Track Width21.2 in.Mowing Height Adjustments1.5 to 4.5 in. in 0.5 in. increments
Mowing WidthTrue – 21 in. (53.34 cm)
Operational
SteeringVariable drive control bar and 3-speed selector lever on handlebarDeck Construction
14 ga. deck with 14 ga. replaceable guards for strength and longevity. Deep draw stamped
Deck type – High-vacuum, high-capacity design
Thickness – 14 ga.
Blades
Cutter – 0.1345 in. thick, milled edge, wear resistant
Engagement – Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade
Blade Brake ClutchHeavy-duty
DischargeRear, extra wide discharge openingMulchingPlug
Other
Includes
Exhaust – Front discharge muffler with guard
Handle bars – 1 in. diameter, thick wall tubing, 3-position adjustable
Fabric grass catcher – 2.74 cu. ft. (2.2 bu.)
Warranty
1-year commercial machine
3-year or 500-hr. non-commercial machine
SR engine
90-day wear item and rental use
Engine
Scag 8C23
General
Total Fuel Capacity 3.5 gallons (36″ and 42″)
5.5 gallons (48″, 52″ and 61″)
Drive Tires 20″ x 8″-10″ (36″)
20″ x 10″-8″ (42″, 48″ and 52″)
20″ x 10″-10″ (61″)
Caster Tires 11″ x 4″-5″ (36″ and 42″)
11″ x 6″-5″ (48″, 52″ and 61″)
Seat Padded with arm rests, adjustment forward and back (tools required)
(no armrests on 36″ and 42″ models)
Drive System
Drive System Type 36″ and 42″ models: Hydro-Gear ZT-2800 Transaxle
48″, 52″ and 61″ models: Tuff Torq TZ450 Transaxle
Pumps Internal Pump: 10 cc
Motors Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
Forward Ground Speed 7 mph
Reverse Ground Speed 5 mph
Parking Brake Hand lever
Deck
Cutting Widths 36″, 42″, 48″, 52″ and 61″
Cutting Height 1.5″ to 4.5″ in .25″ increments
Spindles Aluminum housing with sealed ball bearings.
Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Deck Lift Foot-operated pedal
Type Heavy-Duty Hero Cutter Deck
Blade Engagement Ogura GT1 (74 ft lb) – (36″, 42″, 48″ and 52″)
Ogura GT2 (108 ft lb) – (61″)
Adjustable air-gap for extended life.
Scag V-Ride II (32″)
16HP Kawasaki® FX600 Series Engine
32-inch, 2-blade Advantage fabricated deck
Hydro-Gear®10cc pump and Parker 12ci motor
5 gallon fuel capacity
Ground speed: 8.5 mph forward/5 mph reverse
Front wheels: 11 x 4 in x 5 in
Rear wheels: 20 x 6.5 in x 10 in
3-Year or 500 Hours (Whichever Comes First) Residential Warranty, 2-Year Commercial Warranty
Model: SVRII-32A-16FX
18 in. BlueBird Sod Cutter Honda Engine 5.5 hp SC550
The SC550 model is designed for contractor’s rental shops, golf courses, country clubs and homeowners that have a need to remove and replace sod in small targeted areas. It can also be used for preparing for a new landscaped bed, clearing for a new sidewalk or driveway, or tackling other home improvement projects. With 0.25” cutting depth increments up to 2.5”, this unit can tackle all of your needs and grass types. The knifed outside blade edges allow the machine to easily cut through running stem grasses.
Scag 7B03
General Information
ManufacturerSCAG Power EquipmentModelSFC-21 21 in. Kohler Command PRO CV224
Model CodeSFC-21-7CVColorOrange
Body
Safety FeaturesHandle actuated operator presence system
Drivetrain
Transmission/Drive
GT MG 512 transmission, 3-speed
Transmission output shaft – 0.50 in. diameter
Transmission SpeedGovernor – Mechanical governor with variable control set at 3,300 rpm, idle set at 1,500 rpm
Travel SpeedForward – Up to 4.25 mphWheels/Tires
Front – 9 x 2.25
Drive – 10.5 x 3
Engine
Engine MakeKohler®Engine ModelCommand PRO® CV224
Engine Type4 cycle gas, OHV, vertical shaftCoolingAir
CylindersSingle, One with cast-iron cylinder boreHorsepower7 hp @ 3,300 rpm
Displacement224 ccAir CleanerQuad-Clean™ four-stage, cyclonic air filter
StarterEasy-Pull™ recoil startLubricationOil pump group – Steel oil pump, full pressure with spin-on oil filter
Fuel Capacity1 gal. (3.785 l) plastic tank
Measurements
Length
In operating position – 63 – 68.5 in.
In storage position – 41 in.
Width23.25 in.
Height
Low in operating position – 32.75 in.
High in operating position – 43.5 in.
In storage position – 22 in.
Weight
With bagger – 143 lb.
Without bagger – 138 lb.
Track Width21.2 in.Mowing Height Adjustments1.5 to 4.5 in. in 0.5 in. increments
Mowing WidthTrue – 21 in. (53.34 cm)
Operational
SteeringVariable drive control bar and 3-speed selector lever on handlebarDeck Construction
14 ga. deck with 14 ga. replaceable guards for strength and longevity. Deep draw stamped
Deck type – High-vacuum, high-capacity design
Thickness – 14 ga.
Blades
Cutter – 0.1345 in. thick, milled edge, wear resistant
Engagement – Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade
Blade Brake ClutchHeavy-duty
DischargeRear, extra wide discharge openingMulchingPlug
Other
Includes
Exhaust – Front discharge muffler with guard
Handle bars – 1 in. diameter, thick wall tubing, 3-position adjustable
Fabric grass catcher – 2.74 cu. ft. (2.2 bu.)
Warranty
1-year commercial machine
3-year or 500-hr. non-commercial machine
SR engine
90-day wear item and rental use
Engine
Scag 8C23
General
Total Fuel Capacity 3.5 gallons (36″ and 42″)
5.5 gallons (48″, 52″ and 61″)
Drive Tires 20″ x 8″-10″ (36″)
20″ x 10″-8″ (42″, 48″ and 52″)
20″ x 10″-10″ (61″)
Caster Tires 11″ x 4″-5″ (36″ and 42″)
11″ x 6″-5″ (48″, 52″ and 61″)
Seat Padded with arm rests, adjustment forward and back (tools required)
(no armrests on 36″ and 42″ models)
Drive System
Drive System Type 36″ and 42″ models: Hydro-Gear ZT-2800 Transaxle
48″, 52″ and 61″ models: Tuff Torq TZ450 Transaxle
Pumps Internal Pump: 10 cc
Motors Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
Forward Ground Speed 7 mph
Reverse Ground Speed 5 mph
Parking Brake Hand lever
Deck
Cutting Widths 36″, 42″, 48″, 52″ and 61″
Cutting Height 1.5″ to 4.5″ in .25″ increments
Spindles Aluminum housing with sealed ball bearings.
Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Deck Lift Foot-operated pedal
Type Heavy-Duty Hero Cutter Deck
Blade Engagement Ogura GT1 (74 ft lb) – (36″, 42″, 48″ and 52″)
Ogura GT2 (108 ft lb) – (61″)
Adjustable air-gap for extended life.
Scag V-Ride II (32″)
16HP Kawasaki® FX600 Series Engine
32-inch, 2-blade Advantage fabricated deck
Hydro-Gear®10cc pump and Parker 12ci motor
5 gallon fuel capacity
Ground speed: 8.5 mph forward/5 mph reverse
Front wheels: 11 x 4 in x 5 in
Rear wheels: 20 x 6.5 in x 10 in
3-Year or 500 Hours (Whichever Comes First) Residential Warranty, 2-Year Commercial Warranty
Model: SVRII-32A-16FX
18 in. BlueBird Sod Cutter Honda Engine 5.5 hp SC550
The SC550 model is designed for contractor’s rental shops, golf courses, country clubs and homeowners that have a need to remove and replace sod in small targeted areas. It can also be used for preparing for a new landscaped bed, clearing for a new sidewalk or driveway, or tackling other home improvement projects. With 0.25” cutting depth increments up to 2.5”, this unit can tackle all of your needs and grass types. The knifed outside blade edges allow the machine to easily cut through running stem grasses.
Scag 7B03
General Information
ManufacturerSCAG Power EquipmentModelSFC-21 21 in. Kohler Command PRO CV224
Model CodeSFC-21-7CVColorOrange
Body
Safety FeaturesHandle actuated operator presence system
Drivetrain
Transmission/Drive
GT MG 512 transmission, 3-speed
Transmission output shaft – 0.50 in. diameter
Transmission SpeedGovernor – Mechanical governor with variable control set at 3,300 rpm, idle set at 1,500 rpm
Travel SpeedForward – Up to 4.25 mphWheels/Tires
Front – 9 x 2.25
Drive – 10.5 x 3
Engine
Engine MakeKohler®Engine ModelCommand PRO® CV224
Engine Type4 cycle gas, OHV, vertical shaftCoolingAir
CylindersSingle, One with cast-iron cylinder boreHorsepower7 hp @ 3,300 rpm
Displacement224 ccAir CleanerQuad-Clean™ four-stage, cyclonic air filter
StarterEasy-Pull™ recoil startLubricationOil pump group – Steel oil pump, full pressure with spin-on oil filter
Fuel Capacity1 gal. (3.785 l) plastic tank
Measurements
Length
In operating position – 63 – 68.5 in.
In storage position – 41 in.
Width23.25 in.
Height
Low in operating position – 32.75 in.
High in operating position – 43.5 in.
In storage position – 22 in.
Weight
With bagger – 143 lb.
Without bagger – 138 lb.
Track Width21.2 in.Mowing Height Adjustments1.5 to 4.5 in. in 0.5 in. increments
Mowing WidthTrue – 21 in. (53.34 cm)
Operational
SteeringVariable drive control bar and 3-speed selector lever on handlebarDeck Construction
14 ga. deck with 14 ga. replaceable guards for strength and longevity. Deep draw stamped
Deck type – High-vacuum, high-capacity design
Thickness – 14 ga.
Blades
Cutter – 0.1345 in. thick, milled edge, wear resistant
Engagement – Blade control bar controlled Blade Brake Clutch (BBC). Connected to cutter blade
Blade Brake ClutchHeavy-duty
DischargeRear, extra wide discharge openingMulchingPlug
Other
Includes
Exhaust – Front discharge muffler with guard
Handle bars – 1 in. diameter, thick wall tubing, 3-position adjustable
Fabric grass catcher – 2.74 cu. ft. (2.2 bu.)
Warranty
1-year commercial machine
3-year or 500-hr. non-commercial machine
SR engine
90-day wear item and rental use
Engine
Scag 8C23
General
Total Fuel Capacity 3.5 gallons (36″ and 42″)
5.5 gallons (48″, 52″ and 61″)
Drive Tires 20″ x 8″-10″ (36″)
20″ x 10″-8″ (42″, 48″ and 52″)
20″ x 10″-10″ (61″)
Caster Tires 11″ x 4″-5″ (36″ and 42″)
11″ x 6″-5″ (48″, 52″ and 61″)
Seat Padded with arm rests, adjustment forward and back (tools required)
(no armrests on 36″ and 42″ models)
Drive System
Drive System Type 36″ and 42″ models: Hydro-Gear ZT-2800 Transaxle
48″, 52″ and 61″ models: Tuff Torq TZ450 Transaxle
Pumps Internal Pump: 10 cc
Motors Internal Motor: 10cc (Tuff Torq), 16 cc (Hydro-Gear)
Forward Ground Speed 7 mph
Reverse Ground Speed 5 mph
Parking Brake Hand lever
Deck
Cutting Widths 36″, 42″, 48″, 52″ and 61″
Cutting Height 1.5″ to 4.5″ in .25″ increments
Spindles Aluminum housing with sealed ball bearings.
Construction Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
Deck Lift Foot-operated pedal
Type Heavy-Duty Hero Cutter Deck
Blade Engagement Ogura GT1 (74 ft lb) – (36″, 42″, 48″ and 52″)
Ogura GT2 (108 ft lb) – (61″)
Adjustable air-gap for extended life.
Scag V-Ride II (32″)
16HP Kawasaki® FX600 Series Engine
32-inch, 2-blade Advantage fabricated deck
Hydro-Gear®10cc pump and Parker 12ci motor
5 gallon fuel capacity
Ground speed: 8.5 mph forward/5 mph reverse
Front wheels: 11 x 4 in x 5 in
Rear wheels: 20 x 6.5 in x 10 in
3-Year or 500 Hours (Whichever Comes First) Residential Warranty, 2-Year Commercial Warranty
Model: SVRII-32A-16FX